SAVE YOUR DATA CAREFULLY

SAVE YOUR DATA CAREFULLY

Did you know? That something very valuable from a computer is a data. Why do I say that? Because as we know, if we have so many files that are very important, this must we look. This is damage a computer we cannot be predicted in advance. Therefore if we would that have on the backup data and files on our computer. There are so many ways that we can use to make back up your data, back up both the data offline, such as using the CD, and back up data online through the Internet facilities, whether it is paid or free. However, if the computer damage that we have going on your hard disk, and we cannot repair it, then we can use the services of data recovery to save data or files that are on the hard disk is.

Usually to identify the signs of damage on a hard disk there are two types of damage, the damage to hardware and software damage. Damage to the hardware is usually more going on the hard disk in the disk. Damage like this is often referred to the physical damage. And this type of damage is usually very difficult to regenerate. While the software for the damage usually occurs on the setup disc format that happens when we do run the computer. This we can recognize at the time of booting process, usually when booting process is to take a very long time, it can be hard disk boot sector is damaged.

Usually there are differences in the data recovery, namely the base operating system with Windows and if we use Mac OS, we can MAC data recovery service. For that you should really consider this, if the computer you are using one of the two is operating system. If we want to use data recovery services online, there are several things we should note, are the types of services they provide, whether using the system one way service, or use the system with the server data recovery, this very effect on the type of data you want to save.

PROTECT YOUR COMPUTURE FROM VIRUSES

If we like to play games, then we must also protect our PC from virus attacks. Election must see how the various considerations, between which is the use of light resources, ability to detect the virus, the handling of the virus, the update that is flexible, the start up process, and so forth. Norton, Symantec's product is quite a lot of complaints by users because of the use of the resources that...

PROTECT YOUR LAPTOP FROM VIRUSES

Protect it better than cure, so your laptop should be protected from virus attacks. If your laptop often interacts with the Internet, the possibility of thousands of virus will try to enter your laptop system. Indeed facilitate the spread of Internet viruses, especially at this time; a virus can spread itself to all the network computer in the network in just seconds. There are several steps to anticipate...

ANTIVIRUS 2009

Since the virus that is disbursed through the Internet, the antivirus service is also growing rapidly. Indeed, all existing antivirus capabilities to offer protection against computer system. Currently, there is some antivirus software that is quite good and effective in protecting your computer system. Some antivirus software is familiar to users of laptop or desktop PC. AVG 8.0 If you want a free...

PC SECURE FROM SPYWARE

Internet access is increasingly spyware creators make much more freely run. It is not spyware virus or worm, but what spyware is far more dangerous, because he was spy that you continue to lurk system. Even without the Internet spyware can be installed by someone to spy on all that you do. Moreover, when the system was connected to the Internet, then all activities you will easily be from the distance,...

Continue lendo

ANTIVIRUS

Antivirus software for computers must be there. Because of computer viruses currently more vicious and variety. What's wrong? among other reasons, more and more people utilize the Internet connection. On the other hand, the creator of the virus found more clever ways to attack system. While sophisticated operating system is also more complicated to be regulated so you need a security update as often...

HOW TO REPAIR MOTHERBOARD ?

HOW TO REPAIR MOTHERBOARD ?

Motherboard is a board / main board where the components such as microprocessor and main memory (RAM, ROM, BIOS) chip along with other controllers. There are also slots Expansion is the place to install the card-card additional work to improve the facilities and capabilities that are required. Microprocessor inserted in the socket / slot that matches the shape and size of microprocessor, such as socket 370, 470, LGA 775 socket, a socket 462 (AMD), the socket slot I (Pentium 2 and 3).

In the motherboard, microprocessor to communicate with other components through a bus or data path. This bus has been developed from the bus 66, 100, 133, 200, 266, 333, 400, 500, 800 MHz. The development of this work to compensate for the microprocessor is faster. Slot expansion development experience. Table diagram motherboard has usually included when you buy the CPU.

Total off
Check the power supply : In the situation in the offshore power cable from the power supply, cable release socket is inserted in the ATX1. Once released, re-pair power cable, connect / cable green with black cable, check that the fan rotates in the power supply? If the rotary power supply means good. Loose cable connections before re-install and re-ATX1 cable to the motherboard. Check the Clear CMOS Jumper, whether in position or Clear Free, usually when a new motherboard, the CMOS jumpers position in the Clear position.

Check IC chip set is connected, and in the Switch On, whether or not excessive heat, over heat means Chip set is already damaged. CMOS IC for part time until the sale is not free. Check also whether the switch on its work. Loading motherboard is carefully, you try to use clean liquid, if can not use liquid bottle in a container. After you blow-dry clean. Replace the IC regulator which is located around the socket on the motherboard Power. Change capacity of 1000 s / d 3300 UF / 10 Volt located around the power connector on the motherboard. Be careful to ensure that the component pieces attach power cable not connected to electricity.

But not shown flame
You try and see if anyone listened to the sound of a voice . If there are, the damage usually is in the processor, memory and VGA. Check Processor, you try to grasp whether excessive heat or cold? If excessive heat means the processor fan is not working properly then you will change, but if the processor does not mean that the cold work alias is broken.

Check memory, if memory is usually broken voice heard on the speaker of 3 times. In the dead, pull the memory pin use clean pencil eraser to clean, and then install it again. If it still means that there is a damaged one of the IC is damaged. Check VGA Card, VGA Card pull in the dead / off you try to press, there is less likelihood of entry or try to clean your feet / pin it. If the VGA card fans, clean the fan.

Still does not appear if you try to check perhaps monitor that is not a flame, to ensure that broken monitor or CPU, you try to press keys on the keyboard, whether light is glowing or not. If the flame means damage to the CPU. Which is the default if I fix Computers, I always cleared of dust, whether it is the motherboard, memory, cdrom, floppy disk, etc., because it is very influential in the computer again if the dirty / old is not clean. But you must be careful in the process and do not hurry.

Hang and Often Off
Check the Power Supply, try to use another power supply that is still me to restart or hang them. If after the power supply was replaced normal / good, the powers supply problems. Change course because even if I can regenerate themselves are unsure what can still work well, because the power supply is a vital component. Moreover, at this time the price for power supply to cheap, I suggest to change it.

Check whether the virus, anti-virus program should always be installed and enable the auto protect it. I usually use Norton Anti virus. You need to frequently update your anti virus because if there is a new virus variants, anti-virus while you detect the virus. At the time of hang and have blue screen message such as "error at address ..." there is usually a problem in memory. Clean the memory as the above step.

Try re-installing your Windows
If it still hangs / me try to restart your own check on the motherboard, you see the physical changes in the components, especially capacitor, a rounded black shapes have any posts 10 Volt capacity between 1000 s / d 3300 10 volt, usually visible, if the visible damage / swelling and remove liquids or rust.

JE KAMA DVD TRAY YA LAPTOP IMEFAIL KUFUNGUKA UTAFANYAJA?., NJOO NA FUATILIA HAPA

There are quite a few reasons the DVD tray in your laptop might fail to open when you hit the eject button. About the worst thing it can be is if the motor or gear train failed, which would mean replacing the drive. If the disc in the drive plays OK, you know that the power and the connector are fine. If not, you should try reseating the drive in the bay. It's also possible for the drive to be locked in software by the operating system, or for a power management scheme to have cut power to the drive. Check these by right clicking the drive icon and checking properties, or looking at you power management settings. But, when all else fails and you can't get the disc out of the drive, there's always, THE MIGHTY PAPERCLIP.
	CD and DVD drives for computers have been designed with an emergency release mechanism since time immemorial. Unlike your DVD player for your TV or your stereo CD player, the disc in your computer drive may be much more valuable than the drive itself. Yes, if you own the software legally, you should be able to get a replacement from the software company for a moderate charge, but maybe you need it now. In any case, the emergency release for the DVD tray doesn't require any special tools or skills, just a paperclip. Start by unbending a leg of the largest diameter paperclip that will fit in the hole on the faceplate of the drive. Next, insert it it straight into the hole, and if you're lucky, there will bee a little click before it goes in very far, and the tray will pop out a fraction of an inch.
In the picture to the right, I haven't used any force at all, beyond gently pushing in the paperclip, and the CD tray popped out that far by itself. From here, it's an easy task to pull it out all the way so the disc can be removed. Below, I'm opening the DVD drive out of a Sony Vaio, but the tray didn't spring out when the paperclip pushed in the release, which you can tell by feel. So I had to pull on it with my fingernail behind the plastic facade while depressing the release. It opened pretty stiffly for the first fraction of an inch, and then pulled right out the rest of the way. That pretty much covers what you'll encounter with manually opening an optical drive, either it will pop open as soon as the paperclip works the latch, or you'll have to help it along.
	But there are instances in which the emergency release won't get the tray to eject. The worst of these is if a disc shattered at high speed and jammed all the mechanics up with little shards of plastic. You'll know this is the case by the noise if you gently tilt the drive back and forth. Another possibility is that an adhesive label peeled off in the drive and has gummed up the works. In either case, the odds of the drive being salvageable aren't very good, but if it was a label failure, you should be able to rescue the disc by disassembling the drive around it until the tray ejects or the disc is accessible. And before you rush out and buy a supposed generic replacement for the drive, remember that while the connector may be standard, the drive shell is customized, and you may not be able to transfer all of the shell hardware from one drive to another for mounting.
When the paperclip trick works, it's one of the easiest laptop repairs you can do, and it's also pretty obvious when a stuck tray is the problem. But would youknow what to do if the tray opened and the laptop still wouldn't read DVD's? The Laptop Repair Workbook offers a two part approach to troubleshooting laptop hardware problems. We start by explaining the basic technologies and troubleshooting techniques, then we move on to advanced diagnostic flowcharts. The 191 page printable eBooks is available for instant download anywhere in the world, which beats getting it on CD in the mail!

Laptop Power Adapter and Supply - Illustrated how to repair laptop power cords

	One day your laptop may refuse to power on even though the AC adapter is plugged in. You've probably noticed that your laptop features an LED that lights up when live power is attached and the battery is charging, usually on the front of the laptop body. Older power adapters may also have a status LED to show they are functioning. The AC adapter may have failed if it's plugged into a good power outlet and the cable ends are securely seated in both the adapter and the laptop but power LED doesn't come on. Yet it's more likely the failure is the power lead from the adapter to the laptop. Your laptop may use a straight plug, like Toshiba and Lenovo, or an "L" connector like some Compaq and HP models, or a special proprietary design like some Dell and Sony adapter. The straight in power connectors probably have the highest failure rate because the cord often droops at a sharp angle.
Try wiggling the cord a few inches back from the laptop jack and and see if the power LED on the laptop blinks. If the LED is unsteady or if it only lights if you position the cord a certain way, either the receptacle in the laptop or the wiring to the connector has failed. If you could choose, a bad cord is a much easier problem to repair, and that's what the illustrations on this page describe. Sometimes you won't see any sign of damage on a bad power cord no matter how closely you look because the insulation is unbroken. But the stranded wire inside the insulation could have frayed to the point that it only makes intermittent contact and melts open from current. The cable is normally shielded coax, with the inside conductor soldered to the inside of a barrel connector, and the coax shield soldered to the outside of the barrel connector. The solder joints are inside the molded plastic connector.
	The AC power cord that attaches the adapter to a wall outlet almost never fails as long as it's plugged in solidly. Laptop power cords usually include a ferrite choke to help prevent RF generated in the laptop from flowing back up the ground shield and turning it into a broadcast antenna. If it's too close to the molded connector to allow for replacement, I cut it off and hope nobody complains about interference. While you can always strip coaxial cable with a knife, it pays to own a decent wire stripper so you can make a clean job of it. I remove around 1" of the insulator from the braided shield and then twist the wires together off to one side. Classy technicians may tin the braid with a little solder before proceeding, but it's not really necessary if the connector has a tab with a hole.
There's no point trying to reuse the original molded connector unless you are absolutely desperate, in which case you'll be stuck shaving away the plastic with a box cutter. I've had to do this while overseas when I couldn't find a replacement, but it was a bit of a mess since the ground braid was soldered directly to the outside barrel of the connector on the Toshiba I owned. And it can be tough to resolder manufactured connectors without melting everything because they aren't intended for multiple use. In the U.S. you can still find barrel connectors at Radio Shack, but bring along the original connector and the laptop to make sure you get the size right. You can often find the exact inner and outer diameter in millimeters (they're all metric) by searching on the Internet for AC adapter product descriptions for your laptop.
	Before you solder on the new connector, make sure you slide the plastic shell onto the cord in the proper orientation. It won't fit over the connector after the fact and you'll have to unsolder it all if you forget. If the shell doesn't fit onto the cord or your new connector doesn't include a shell, you can fake one up with many turns of electric tape. I generally leave enough room so the connector can fit into the laptop power jack as far as it will go, but good electrical contact is made before it's completely seated. In the picture I show the yellow inner conductor of the coax soldered to the tab that corresponds the center conductor of the barrel connector. The silver braid is soldered to the tab which corresponds to the outside of the barrel connector. You can use heat shrink tube over the tabs, if you have it, or even use a couple heat shrink layers in place of a shell.
I tend not to trust the connector shell so I work a little electrical tape in between the two tabs to make sure they can't get crushed together and short. The trick is leaving enough room to get the shell over it all. The shell can be screwed onto connector since both pieces are threaded. After my first experience when I was forced to carve up a molded connector with a razor blade while travelling, I starting keeping a spare ready made in my laptop case. If the AC adapter cord I'm using fails, I can just cut off the end and splice on the replacement by twisting the wires together. The main failure mechanism for these cords is from the cord drooping down and flexing around when you work on your lap or run the laptop at the edge of a table.
	The problem shown on this page, a frayed or broken power adapter, is easy to diagnose. But most laptop issues benefit from careful troubleshooting before you rush to spend money on parts. The Laptop Repair Workbook is focused on troubleshooting laptop hardware. It includes an introductory section on all power and charging related problems, followed by an advanced flowchart for troubleshooting battery charging and AC power operation. The 191 page printable eBook version can be purchased for instant download anywhere in the world at about half the cost of buying the paperback and paying for shipping.